Circuit Breakers

    Inventory #

  MC4682

FAL36050

by

Square D

Molded Case Circuit Breaker

50 amps

600 volts

Low Voltage

all specifications...
  • FAL36050 available as-is,
    or remanufactured
  • Remanufactured breaker includes
    1 Year Parts & Labor Warranty
  • Large stock of FAL36050 Replacement Parts
Product Photos
p1030122 p1030123 p1030124

Current Condition

This photo shows a similar circuit breaker to MC4682, after it had undergone remanufacturing by
RESA Power. Actual photos of this FAL36050 Molded Case Breaker in its current condition are shown above.

Detailed Specs
General Specifications

Catalog #: FAL36050

Type: Molded Case Breaker

Manufacturer: Square D


Ratings

Frame Current: 50 amps

Voltage: 600 volts

Manual operation

Fixed mounting


Written Detailed Specification

Square D FAL36050 Fixed mounted Molded Case Circuit Breaker, Low Voltage, 50 Amps, 600 Volts, Manual operation.


Warranty

RESA Power warranties this refurbished Square D FAL36050 circuit breaker for one year, including all labor, freight and materials required to return it to operational standards. RESA Power guarantees this breaker will operate to your satisfaction given competent supervision and normal load and usage conditions. Any repairs performed without the express written permission of RESA Power Inc. shall invalidate this warranty. RESA Power shall not be liable to the customer, or to any other person, for consequential damages, lost profits or other kinds of damages arising out of the sale or use of this circuit breaker.


The Square D FAL36050 from RESA Power

All Square D FAL36050 Molded Case Breakers can be purchased as remanufactured to factory standards (please see FAL36050 factory remanufacturing specification). You can also order your Square D FAL36050 Molded Case Breaker wired to your specified wiring diagrams. We also carry a large stock of replacement parts for the Square D FAL36050 Molded Case Breaker. Call one of our sales consultants today.

Remanufacturing
Circuit Breaker Remanufacturing
Circuit Breaker Remanufacturing

At RESA Power, we don’t just rebuild Molded Case Breakers, we remanufacture them. All of our remanufactured circuit breakers conform to NETA and ANSI C37 specifications, and all tolerances are checked to meet or exceed the original manufacturer’s specifications. Here’s how we will remanufacture this Square D FAL36050 for you:

Inspection and Initial Testing

We’ll start with an initial inspection and test of this Molded Case Breaker. We first want to check its mechanical and electrical operation. We’ll then perform a “Ductor” test, a “Megger” test, and several other tests to determine our starting point. (See “Testing Procedures” below for further description.)

During our initial testing, we’ll take note of any wiring, taping, or heat shrinking that shows any signs of deterioration. We’ll also note any springs showing signs of distortion, rust, brittleness, or improper compression. Noted items will be replaced later using equivalent or superior components.

Disassembly, Cleaning, and Replacement

All of our remanufactured circuit breakers are dismantled down to the last moving part:

  • Conductive parts are bead blasted as needed and cleaned using a vibratory cleaner.
  • Plated parts showing signs of peeling are replated or replaced.
  • Insulated parts and pole pieces are solvent cleaned to be free of silicone, oil, paint and moisture.
  • Frame parts and mechanism parts are aluminum oxide blasted and then repainted or replated.
  • All standard hardware is replaced with new hardware.
  • All pins are replated.
  • Roller and needle bearings are lubricated. (Nylon sleeve bearings do not require lubrication).
  • All springs are either replated or replaced.
  • Control wiring is cleaned or replaced as necessary.
  • Toggle switches, motor cut-off switches and relays are cleaned or replaced with identical or equivalent devices. Voltage and amperage ratings will always meet or exceed original specifications.

Reassembly and Final Testing

Now that the circuit breaker has been torn down with all of its components cleaned, refurbished or replaced, it’s time to put it all back together. RESA Power follows a meticulous quality control procedure during reassembly to ensure years of trouble-free operation. Breakers are reassembled to the original factory specification as follows:

Circuit Breaker Remanufacturing
  • Frame parts are reassembled and aligned.
  • Contact assemblies are adjusted to the manufacture's guidelines.
  • Current-carrying parts are reassembled and torqued to the manufacturer's or NETA standards.
  • New retainer pins or clips are carefully installed and checked.
  • Electrical devices and wiring harness are re-installed on the breaker and checked per factory or customer's wiring specifications.

Upon completion of reassembly, the now completely remanufactured circuit breaker is retested and certified by a quality control engineer. The rebuilt circuit breaker will be delivered to you with a Job Packet containing an Initial Inspection Report, a Quality Control Checklist, and a Final Test Report. These reports include all pertinent information to ensure that you are receiving a product of the highest quality.


Testing Procedures

"Ductor" Test

The Digital Low Resistance Ohmmeter (“Ductor”) uses dual spike probes to measure the resistance of the current carrying path of the entire phase. This test includes as much of the path as practical for each pole, ensuring that the entire pole (not just the contacts) has a low resistance.

“Megger” Test

The insulation of the circuit breaker is tested utilizing a 1000 volt megohmmeter (“Megger”). The breaker is tested in the closed position because of the additional stress placed on the insulators due to spring tension. The insulation is tested between phase-to-phase and phase-to-ground. With the breaker open, the breaker is tested from line-side to load-side of each pole, verifying insulation between the source and the load. The lowest reading of each phase is recorded. RESA Power maintains a standard requirement of a minimum of 500 megohms, ten times NETA minimum requirement.

High Current Primary Injection Test

The high current test is performed using a low voltage (usually less than 12 VAC) high current test set. Each phase or pole is tested for every trip function provided on the trip unit. The test is conducted in the following order to standardize results:

  • Long time (300% of pick-up current)
  • Short time (150% of pick-up current)
  • Ground time (150% of pick-up current)
  • Instantaneous1 (Determines the pick-up current)

1 Instantaneous is not a time test like the others. Therefore the test uses a short pulse of current and the short time functions are overridden or adjusted out of range of the instantaneous setting.

Control Circuitry Test

The control diagram of the circuit breaker is verified against your drawing or the manufacturer’s diagram. The circuit breaker is electrically operated using a variable power supply to check the pick-up voltage of the trip coil, under-voltage coil, and the closing coil. The maximum voltage limit of the close coil is also tested so it will still close and latch.


Warranty

RESA Power warranties this rebuilt Square D FAL36050 circuit breaker for one year, including all labor, freight and materials required to return it to operational standards. RESA Power guarantees this breaker will operate to your satisfaction given competent supervision and normal load and usage conditions. Any repairs performed without the express written permission of RESA Power Inc. shall invalidate this warranty. RESA Power shall not be liable to the customer, or to any other person, for consequential damages, lost profits or other kinds of damages arising out of the sale or use of this circuit breaker.

Other Products
Similar Products to MC4682 (FAL36050)
Catalog Number Manufacturer Type Frame Current Voltage
FAL36050 Square D Molded Case Breaker
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
FHL26000M4200 Square D Molded Case Breaker 600 volts
KA36200 Square D Molded Case Breaker 200 amps 600 volts
KA36200 Square D Molded Case Breaker 200 amps 600 volts
KA36225 Square D Molded Case Breaker 225 amps 600 volts